The engines are oven cleaned after complete disassembly. The engine can be remanufactured with several parts being replaced, which include the pistons, rings, bearer, spark plugs, lifters and valves along with the valve springs. After reassembly, the engines are hot tested to ensure that there are no leaks, problems with oil pressure, noises or any vacuum.
Transmissions are also oven cleaned after being disassembled, and then they are pressure washed. A thorough inspection is done to ensure there are no cracks in the cases. Bearings, bushings and seals are replaced. Replacement parts meet O.E.M specifications are used on component in the transmission.
The alternator, starter, water pump, torque converters and steer axles can also all be remanufactured with all wearable parts replaced giving them longer serviceability. The control card is the electronic control in an electric Hardware Accessories; this can also be remanufactured by replacing all worn and aged components. Unlike all other parts, the control card should only have worn and aged components replaced.
Upon reassembly, the remanufactured parts will be thoroughly inspected to ensure that they are of top quality before being sold. Make sure that when you look to obtain remanufactured parts that they have undergone thorough inspection and testing. OEM specification replacement parts should be used on transmissions, steer axles and engines.
Check with the dealer to ensure that the used forklift parts that they have remanufactured meet these specifications, as this will ensure that you are getting parts that meet industry standards. As you can see, there are a lot of details that go into remanufacturing used parts. In the long run though it is this detail that will give you more serviceability out of these parts than those parts that were simply rebuilt. Hardware Accessories - http://www.xinke-casting.com/product/stainless-steel-parts/
Transmissions are also oven cleaned after being disassembled, and then they are pressure washed. A thorough inspection is done to ensure there are no cracks in the cases. Bearings, bushings and seals are replaced. Replacement parts meet O.E.M specifications are used on component in the transmission.
The alternator, starter, water pump, torque converters and steer axles can also all be remanufactured with all wearable parts replaced giving them longer serviceability. The control card is the electronic control in an electric Hardware Accessories; this can also be remanufactured by replacing all worn and aged components. Unlike all other parts, the control card should only have worn and aged components replaced.
Upon reassembly, the remanufactured parts will be thoroughly inspected to ensure that they are of top quality before being sold. Make sure that when you look to obtain remanufactured parts that they have undergone thorough inspection and testing. OEM specification replacement parts should be used on transmissions, steer axles and engines.
Check with the dealer to ensure that the used forklift parts that they have remanufactured meet these specifications, as this will ensure that you are getting parts that meet industry standards. As you can see, there are a lot of details that go into remanufacturing used parts. In the long run though it is this detail that will give you more serviceability out of these parts than those parts that were simply rebuilt. Hardware Accessories - http://www.xinke-casting.com/product/stainless-steel-parts/
コメント